Search DCCconcepts
Please take advantage of our search feature to easily find products, videos, manuals, advice and more!
1. Sapphire Solder & Flux Combo
Combo Pack – DCCconcepts Sapphire Solder and Flux Contents: 1x DCS-S179 Sapphire 179 Solder (Super Versatile) 1x DCS-SFNC Sapphire No-Clean Flux 50ml This combination makes everyone a soldering expert! Sapphire 179 solder is 0.6mm diameter solder which flows beautifully. It is perfect for brass, copper, wiring, trackwork, soldering to nickel silver or even to steel. […]
2. C3.0 Type Tip for ST2150D Soldering Iron
T-3C Tip – A medium C type tip for DCS-ST2150D. Tip face is a 3.0mm angled flat giving you the ideal tip for soldering mid sized brass parts, track wiring and the like.
3. C3.0 Type Tip for ST2080D Soldering Iron
T-3C Tip – A medium C type tip for DCS-ST2080D. Tip face is a 3.0mm angled flat giving you the ideal tip for soldering mid sized brass parts, track wiring and the like.
4. T2.4D Type Tip for ST2080D Soldering Iron
T-2.4D Tip – A medium D type tip for DCS-ST2080D. Tip face is a 2.4mm with both a ‘line’ and ‘face’ soldering area. This tip can be used for soldering in narrow locations and is ideal for circuit-board use, soldering chip parts, ‘drag’ soldering, tinning wire and point soldering.
5. 80 Watt Soldering Station with Digital Temperature Control (including Solder, Flux & Spare Tip)
80 Watt Soldering Station with Digital Temperature Control A superb soldering station packed with all the features expected from today’s soldering equipment. Automatic standby and Power Down modes, Digital Display, ESD safe, Password Lockable and 3 separate temperature presets – all precisely controllable using the digital controller unit. Good for white metal and brass kits, […]
6. 60 Watt Soldering Station with Digital Temperature Control
60 Watt Soldering Station with Digital Temperature Control A superb soldering station packed with all the features expected from today’s soldering equipment. Automatic standby and Power Down modes, Digital Display, ESD safe, Password Lockable and 3 separate temperature presets – all precisely controllable using the digital controller unit. Good for white metal and brass kits, […]
7. 65 Watt Soldering Station – Complete Kit
DCS-AT689 65 watt Soldering Station with Digital Temperature Control. This full kit contains everything you need to get started: 1x DCS-AT689A Soldering Station 1x Solder Stand and Sponge 1x DCS-S179 Sapphire Solder 1x DCS-SFNC-I Sapphire Solder Flux 1x DCS-T2C Spare Tip The DCS-AT689A is a very good choice for those doing almost anything on the […]
8. 150 Watt Hand-Held Soldering Iron with Digital Temperature Control
Super-high quality 150 Watt adjustable (with digital control) soldering iron with a 4-core ceramic PTC heater. The ST2150D has a temperature range from 250°C to 480°C. Usable worldwide (110V to 240V AC), the ST2150D is of course EMC safe. It is supplied with TWO tips appropriate for modelling use. The ST2150D is strongly recommended for […]
9. 80 Watt Hand-Held Soldering Iron with Digital Temperature Control
Super-high quality 80 Watt adjustable (with digital control) soldering iron with a 4-core ceramic PTC heater. The ST2080D has a temperature range from 250°C to 480°C. Usable worldwide (110V to 240V AC), the ST2080D is of course EMC safe. It is supplied with TWO tips appropriate for modelling use. Comfortable to hold, the ST2080D has […]
10. 65 Watt Hand-Held Soldering Iron with Digital Temperature Control
ST-2065D 65 Watt Hand-Held Soldering Iron with Digital Temperature Control. The ST-2065D is a 65 watt temperature controlled soldering iron that just may be the perfect choice for those who will mainly solder track or wiring around the layout as there is no “base station” to accidentally pull off the layout top! ST-2065D has more […]
11. Leaded, No-Clean 183° Solder Paste
183° leaded solder, made into a paste with some flux for those who prefer to work with paste solders. Perfect for attaching small parts without excess or mess. Packed in a convenient syringe. Please store in an airtight bag and refrigerate between uses. Contents – 35g Essentials & Accessories Flux Soldering Irons Soldering Iron Essentials […]
12. Sapphire 179 Solder (Super Versatile)
Sapphire 179 Solder (Super Versatile) The solder that in combination with our Sapphire No Clean Flux, makes everyone an expert! Sapphire 179 solder is 0.6mm diameter solder which flows absolutely brilliantly. It is perfect for brass, copper, wiring, trackwork, soldering to nickel silver or steel and it even solders spring steel and to 300 and […]
13. Sapphire 145 (Detail Solder)
Sapphire 145 (Detail Solder) Sapphire 145 is 0.8mm diameter solder with no peaking and which flows absolutely brilliantly. It has a very narrow melt range which makes quick joints on detail parts a pleasure, yet it flows exceptionally well for long seams on brass kits. Whilst we recommend that it is used with our Sapphire […]
15. Desoldering Braid
Removes excess solder and cleans up solder joints. Essential for clean kit building in brass and for removal of parts in electronics. Desoldering Braid gives you a clean solder pad to work with. Pack contains 3.0m at 2.5mm width. Essentials & Accessories Solder Flux Soldering Irons Soldering Advice
16. Cobalt-S Solder-Free Harness (3 Pack)
Cobalt-S Solder-Free Harness (3 Pack) Something special for those who find soldering complex wiring difficult: Three complete harnesses for Cobalt-S levers complete with 9-way spring connectors for easy solder-free installation. Complete with twelve mounting screws. Click to view our Cobalt-S Levers.
17. Solderless i-Link Connectors (25-pack)
While we really do prefer soldered connections, there are modellers who are unable or do not want to work under the layout with a soldering iron and times and places where its simply not convenient to solder. We therefore looked long and hard at that is available to find the ideal connectors to make it […]
18. Advice: Soldering – The Black Art De-mystified (Part 3)
SOLDERING part 3
19. Advice: Soldering – The Black Art De-mystified (Part 2)
SOLDERING part 2
20. Advice: Soldering – The Black Art De-mystified (Part 1)
SOLDERING part 1
21. Cobalt Barrel-Plug Adapter (3 Pack)
A pack of three coaxial DC barrel plug adapters that will let you connect bare wires to a DC-plug fitted power supply that takes away the need to cut the plug off and get the soldering iron out. Suitable for the following DCCconcepts power supplies: DCP-PS12 DCP-12.3.XX DCP-18.2.XX
22. DCCconcepts ADiA Information Hub
DCCconcepts ADiA Intelligent Accessory decoders have some very special features which make them totally unique. – Fits snugly in the recess in every Cobalt turnout motor (using the pre-fitted foam pad) or you can mount it seperately with the screws provided. – Simple to wire without soldering – Plug-and-play connectors for DCCconcepts magnetic or infra-red […]
23. Pack of 500 Gold Plated Pins
500 hardened and gold plated pins for fixing of working point rodding rod stools, track or many other things around the layout. Small and subtle but very strong, the gold plating also makes then easy to solder to. Caution – they are hard, so only use a file or hardened cutters to trim to length. […]
24. Pack of 100 Gold Plated Pins
100 hardened and gold plated pins for fixing of working point rodding rod stools, track or many other things around the layout. Small and subtle but very strong, the gold plating also makes then easy to solder to. Caution – they are hard, so only use a file or hardened cutters to trim to length. […]
25. T-K Tip (for DCS-ST2065, ST60, ST80 & AT689A)
T-K Tip for DCS-ST2065, DCS-ST60, DCS-ST80 & DCS-AT689A irons. This type has a shape like a knife and is capable of soldering by applying the tip in 3 ways: line, face and point. It is used for soldering at narrow pitches, correction of bridging and drag soldering. Essentials & Accessories Solder Flux Soldering Irons Soldering Advice
26. T-1.2D Tip (for DCS-ST2065D, ST60, ST80 & AT689A)
T-1.2D Tip – A medium D type tip for DCS-ST2065D, DCS-ST60, DCS-ST80 & DCS-AT689A irons. Tip face is a 1.2mm with both a ‘line’ and ‘face’ soldering area. This tip can be used for soldering in narrow locations and is ideal for circuit-board use, soldering chip parts, ‘drag’ soldering, tinning wire and point soldering. Essentials & […]
27. T-3C Tip (for DCS-ST2065, ST60, ST80 & AT689A)
T-3C Tip – A medium C type tip for DCS-ST2065, DCS-ST60, DCS-ST80 & DCS-AT689A irons. Tip face is a 3.0mm angled flat giving you the ideal tip for soldering mid sized brass parts, track wiring and the like. Essentials & Accessories Solder Flux Soldering Irons Soldering Advice
28. T-2C Tip (for DCS-ST2065, ST60, ST80 & AT689A)
T-2C Tip – A medium C type tip for DCS-ST2065D, DCS-ST60, DCS-ST80 & DCS-AT689A. Tip face is a 2.0mm angled flat giving you the ideal tip for soldering mid sized brass parts, track wiring and the like. Probably the most common tip size used in the hobby (for good reason). Essentials & Accessories Solder Flux […]
29. T-1C Tip (for DCS-ST2065D, ST60, ST80 & AT689A)
T-1C Tip – A medium-small C type tip for DCS-ST2065D, DCS-ST60, DCS-ST80 & DCS-AT689A . Tip face is a 1.0mm angled flat giving you real versatility. Nice for soldering smaller brass parts and larger PCB connections. Essentials & Accessories Solder Flux Soldering Irons Soldering Advice
30. Red/Black Mimic LED Switch Wire – 10 Metres
Alpha Mimic Extension Wire – 10 Metres. An alternative to extension leads for those who like to solder. 10 Metres of fine twinned wire. Supplied with red and black heat-shrink.
31. Cobalt iP Analogue and Omega Switch Pack with LEDs (RED & GREEN)
SIX plug & play pre-wired switches (CBSGR) with 12 pre-terminated plug-in green LEDs. Available with Red, Green or Red+Green bicolour LEDs, these switch packs are easy to use and create the perfect combination when used for control of Cobalt iP Analog, Cobalt Omega Analog and other slow-action turnout motors. All done with less soldering, faster […]
32. Cobalt iP Analogue and Omega Switch Pack with LEDs (RED)
SIX plug & play pre-wired switches (CBSRD) with 12 pre-terminated plug-in green LEDs. Available with Red, Green or Red+Green bicolour LEDs, these switch packs are easy to use and create the perfect combination when used for control of Cobalt iP Analog, Cobalt Omega Analog and other slow-action turnout motors. All done with less soldering, faster […]
33. Cobalt iP Analogue and Omega Switch Pack with LEDs (GREEN)
SIX plug & play pre-wired switches (CBSGR) with 12 pre-terminated plug-in green LEDs. Available with Red, Green or Red+Green bicolour LEDs, these switch packs are easy to use and create the perfect combination when used for control of Cobalt iP Analog, Cobalt Omega Analog and other slow-action turnout motors. All done with less soldering, faster […]
35. Tip Reviver
Soldering iron tip reconditioner and reviver. Gives a new tinning coat to the iron tip, restoring its ability to transfer heat quickly. Essentials & Accessories Solder Flux Soldering Irons Soldering Advice
36. Iron Stand (w/Sponge)
It is important to keep you and your soldering iron safe when you are not holding it! This high quality stand will protect the soldering iron tip and keep you and your workbench away from unexpected painful moments. This top quality stand will last forever. It is recommended for ALL hand-held soldering irons sold by […]
37. Brass Wool Tip Cleaner
Brass Wool Tip Cleaner – A convenient pot with a wad of activated brass ‘wool’ which will take all excess solder from the tip and give it a great clean. Never use anything more abrasive than this on your tip or you will shorten tip life considerably! Essentials & Accessories Solder Flux Soldering Irons Soldering […]
38. Nut Driver Set
Using the DCD-NND.3 – Nut Driver Set One Handle and three of the most important Nut Driver sizes for use with model railways and similar hobbies.. Have you ever wondered why some modellers keep using the same tools, year in, year out, while others always seem to need to buy replacements? This usually happens because with […]
39. Screw and Nut Driver Set
Using DCD-SND.12 – Screw and Nut Driver Set Three Handles, Three essential (-) type screwdriver tips, 3 essential (+) type screwdriver tips and 3 important Nut Drivers for use with model railways and similar hobbies. Have you ever wondered why some modellers keep using the same tools, year in, year out, while others always seem […]
40. Pre-Etched Sleepers 1.6mm (4mm scale) Three Way Points
Pre-Etched Sleepers 1.6mm (4mm scale) Three Way Points. 4mm scale UK prototype 3-way Point sleepering, pre-etched. This fret contains enough correct length sleepers to allow a three way point to be constructed. Sleepers are 1.6mm thick for direct soldered construction. Printable PDF Templates (A3): Three-Way Asymmetric Points Click to view the rest of our Pre-etched […]
41. Pre-Etched Sleepers 1.6mm (4mm scale) Outside Slips
Pre-Etched Sleepers 1.6mm (4mm scale) Outside Slips 4mm scale UK prototype Single Outside Slip sleepering, pre-etched. This fret contains enough correct length sleepers to allow a selection of slips to be constructed. Sleepers are 1.6mm thick for direct soldered construction. Printable PDF Templates (A3): Outside Slips Click to view the rest of our Pre-Etched sleepers […]
42. Pre-Etched Sleepers 1.6mm (4mm scale) Double Slips
Pre-Etched Sleepers 1.6mm (4mm scale) Double Slips 4mm scale UK prototype Double Slip sleepering, pre-etched. This fret contains enough correct length sleepers to allow a selection of slips to be constructed. Sleepers are 1.6mm thick for direct soldered construction. Printable PDF Templates (A3): Double Slips 7 and 8 Click to view the rest of our […]
43. Pre-Etched Sleepers 1.6mm (4mm scale) Diamond Crossing
Pre-Etched Sleepers 1.6mm (4mm scale) Diamond Crossing. 4mm scale UK prototype Diamond Crossing sleepering, pre-etched. This fret contains enough correct length sleepers to allow a selection of Diamonds to be constructed. Sleepers are 1.6mm thick for direct soldered construction. Printable PDF Templates (A3): Diamond Crossing 5 and 6 Diamond Crossing 7 and 8 Click to […]
44. Pre-Etched Sleepers 1.6mm (4mm scale) B9 to A5 Points
Pre-Etched Sleepers 1.6mm (4mm scale) B9 to A5 Points. 4mm scale UK prototype Pointwork sleepering, pre-etched. This fret contains enough correct length sleepers to allow any point between B9 and B6 and A5 to be constructed. Tie Bars included. Sleepers are 1.6mm thick for direct soldered construction. Printable PDF Templates (A3): A5 Turnout B6 Turnout […]
45. Pre-Etched Sleepers 1.6mm (4mm scale) Straight Track
Pre-Etched Sleepers 1.6mm (4mm scale) Straight Track. 4mm scale UK prototype sleepering, pre-etched. This fret contains 80 sleepers for plain pointwork-related track, each 1.6mm thick for direct soldered construction (32mm long). Printable PDF Templates (A3): Straight Track Hornby Magazine also reviewed this product in February 2018:
46. Rail (Bullhead) 4mm Scale (Stainless Steel) L=960mm (120 Pack) (Courier Only)
Rail (Bullhead) 4mm Scale (Stainless Steel) L=960mm (120 Pack) 120x 960mm lengths of 4mm scale stainless steel bullhead rail (equivalent to code 75). Solders with DCCconcepts S179 solder and DCCconcepts flux using iron at high temperature. No rail cleaning needed as Stainless does not oxidise. Stainless steel really looks like steel too, making it the […]
47. Rail (Bullhead) 4mm Scale (Stainless Steel) L=960mm (10 Pack) (Courier Only)
Rail (Bullhead) 4mm Scale (Stainless Steel) L=960mm (10 Pack) 10x 960mm lengths of 4mm scale stainless steel bullhead rail (equivalent to code 75). Solders with DCCconcepts S179 solder and DCCconcepts flux using iron at high temperature. No rail cleaning needed as Stainless does not oxidise. Stainless steel really looks like steel too, making it the […]
52. Kynar Wire 2m (Silver Plated) Red
Kynar Wire 2m (Silver Plated) in Red. 2m of red kynar wire. Kynar wire is solid copper and silver plated and can have huge advantages for installations with not much space as the thin but tough insulation takes very little space and the solid wire stays where you put it. Silver plating makes it very […]
53. Pickup Springs 3.0mm Axles (48 Pack)
Pickup Springs 3.0mm Axles (48 Pack) 48 springs, sized perfectly for zero friction addition when used to add power pickup on 3.0mm axles (Some O, some OO and HO wagon/coach stock and some tender axles). They are a delight to use. – Simply remove one wheel, add the spring and replace the wheel-set, making sure you […]
54. Pickup Springs 2.0mm Axles (48 Pack)
Pickup Springs 2.0mm Axles (48 Pack) 48 springs, sized perfectly for zero friction addition when used to add power pickup on 2.0mm axles (OO and HO standard size). They are a delight to use. – Simply remove one wheel, add the spring and replace the wheel-set, making sure you note which wheel is ‘live’ to […]
55. Pickup Springs 1.5mm Axles (48 Pack)
Pickup Springs 1.5mm Axles (48 Pack) 48 springs, sized perfectly for zero friction addition when used to add power pickup on 1.5mm axles (N scale and P4 standard size). They are a delight to use. – Simply remove one wheel, add the spring and replace the wheel-set, making sure you note which wheel is ‘live’ […]
56. 6-function 21 to 8 Pin Adapter (50 Pack)
6-function 21 to 8 Pin Adapter (50 Pack) For installers and resellers or even those with huge fleets… we also offer a bulk pack of Fifty 21 to 8 pin adapters. These save considerably on the 3 pack. 21 to 8 pin adapters, making it easy for you to fit an NEM652 8 pin NMRA […]
57. 6-function 21 to 8 Pin Adapter (3 Pack)
6-function 21 to 8 Pin Adapter (3 Pack) Three 21 to 8 pin adapters, making it easy for you to fit an NEM652 8 pin NMRA plug fitted decoder into a locomotive which has a 21MTC connector installed. Unlike other adapters, DCCconcepts 21 pin adapters are already pre-wired with function 3 / Aux 1 / […]
58. High Quality Power Bus Strippers
DCCconcepts heavy duty BUS wire strippers are the best time saver ever! Save HOURS when installing the main power bus and if you plan well you can also do it with NO need for cuts and breaks in it at all with this really high quality tool. Machined high quality alloy steel jaws strip all […]
59. Bus Terminal Tags (50 Pack)
Bus Terminal Tags (50 Pack) Pack of 50 ‘tags.’ There is no easier way to mount and secure the power bus than with these tags. Left and right power bus is secured in the larger tag holes, and droppers are easily connected by soldering into the corresponding eyelet holes. Pre-tinned for easy soldering, tags also […]
60. Bus Terminal Tags (25 Pack)
Bus Terminal Tags (25 Pack) Pack of 25 ‘DCC-Tags’. There is no easier way to mount and secure the power bus (With ZERO need for cutting) than with these tags. Left and right power bus is secured in the larger tag holes, and droppers are easily connected by soldering into the corresponding eyelet holes. Pre-tinned […]
61. 12v 1.5amp Regulated Power Supply
A high-reliability UK power supply with a regulated DC output, recommended for use in the United Kingdom. Input 110-250vAC Output 12.0v DC at 1.5amps 2.5mm barrel connector Barrel connector can be removed – positive and negative wire marked inside insulation for screw-terminal or solder connection. Please note – removal of barrel connector does not void […]
62. Alpha Mimic Add-On Building Lighting Discs + Leads
Alpha Mimic Add-On Building Lighting Discs + Leads allows you to add more Lighting Discs to your Alpha Mimic Plug & Play Controllable Building Lighting system. This pack also allows for analog (or “DC”) installation of Alpha Mimic Building Lighting without the DCC control board. Simply supply DC power to the Lighting Disc to illuminate […]
63. Alpha Mimic Plug & Play Controllable Panel Lighting (Blue)
Alpha Mimic Panel Controller (with Blue LEDs) The easiest panel wiring you will ever do! Alpha Mimic is totally plug-and-play with everything linked by easy to use connectors except the DCC Accessory Bus wires, and they use a simple screwdriver connection! We provide a simple linking cable with every Alpha Mimic so you can daisy-chain […]
64. Alpha Mimic Plug & Play Controllable Panel Lighting (Red+White)
Alpha Mimic Panel Controller (with Red+White LEDs) The easiest panel wiring you will ever do! Alpha Mimic is totally plug-and-play with everything linked by easy to use connectors except the DCC Accessory Bus wires, and they use a simple screwdriver connection! We provide a simple linking cable with every Alpha Mimic so you can daisy-chain […]
65. Alpha Mimic Plug & Play Controllable Panel Lighting (Red+Green)
The easiest panel wiring you will ever do! Why run endless meters of cable from every turnout on your layout when you can connect your Mimic panel to only 2 wires? Alpha Mimic will cleverly eavesdrop on your DCC Bus so it knows which LEDs to change on your panel! Alpha Mimic is totally plug-and-play with […]
66. Alpha Mimic Plug & Play Controllable Panel Lighting (Red)
The easiest panel wiring you will ever do! Why run endless meters of cable from every turnout on your layout when you can connect your Mimic panel to only 2 wires? Alpha Mimic will cleverly eavesdrop on your DCC Bus so it knows which LEDs to change on your panel! Alpha Mimic is totally plug-and-play with […]
67. Alpha Mimic Plug & Play Controllable Panel Lighting (Green)
The easiest panel wiring you will ever do! Why run endless meters of cable from every turnout on your layout when you can connect your Mimic panel to only 2 wires? Alpha Mimic will cleverly eavesdrop on your DCC Bus so it knows which LEDs to change on your panel! Alpha Mimic is totally plug-and-play with […]
68. Cobalt Alpha Switch Y-Connectors (3 Pack)
Cobalt Alpha Switch Y-Connectors (3 Pack) Need to parallel 2 or more Alpha-Switches or perhaps have one switch control two devices? Even this is no problem… this “2 into 1” Y adapter PCB takes two switches one side, one on the other, allowing you to just plug them together – no wire cutting, stripping or […]
69. Alpha Mimic Plug & Play Controllable Building Lighting
Alpha Mimic Plug & Play Controllable Building Lighting allows you to easily install and control building lighting conveniently powered from your DCC bus! Simple installation! Connect the mimic control board to your DCC bus. Install the lighting discs into your buildings. Connect the mimic plug cable extensions. Plug your lights into the mimic control board. […]
70. Alpha Switch-i (6 Pack) (Red/Green)
Alpha Switch-i (6 Pack) (Red/Green) – Perfect for use with Alpha Mimic and ESP to create almost 100% solder-free control panels that can even be totally wire-free if you wish! Control panels need feedback so they can show the way things are operating, but most switches need complex contacts to make it possible. Alpha Switch-i […]
71. Legacy Wired Joiners – Code 75 – Pack of 6
300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 75 track from Legacy and equivalent track from all major brands. Super-quick and easy to use – no soldering necessary! Pack contains 6 pairs Extend easily using iLink Connectors (DCW-iL.25) and DCCconcepts Red & Black dropper wire (RCA-RBW.5)
72. Legacy Wired Joiners – Code 100 – Pack of 6
300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 100 track from Legacy and equivalent track from all major brands. Super-quick and easy to use – no soldering necessary! Pack contains 6 pairs Extend easily using iLink Connectors (DCW-iL.25) and DCCconcepts Red & Black dropper wire (RCA-RBW.5)
73. Intelligent 3-Address Accessory Decoder (3-Pack)
DCCconcepts ADiA decoders have some very special features which make them totally unique. – Fits snugly in the recess in every Cobalt turnout motor (using the pre-fitted foam pad) or you can mount it seperately with the screws provided. – Simple to wire without soldering – Plug-and-play connectors for DCCconcepts magnetic or infra-red detectors – […]
74. Intelligent 3-Address Accessory Decoder
DCCconcepts ADiA Intelligent Accessory decoders have some very special features which make them totally unique. – Fits snugly in the recess in every Cobalt turnout motor (using the pre-fitted foam pad) or you can mount it seperately with the screws provided. – Simple to wire without soldering – Plug-and-play connectors for DCCconcepts magnetic or infra-red […]
75. Legacy Models Intelligent Detector (3-Pack)
Legacy Models Intelligent Detector 3-Pack (LM-iD.3) The Legacy LM-iD is an intelligent Inductive detector that is easy to install, trouble free and exceptionally reliable. LM-iD works everywhere: On layouts built in every common modelling scale, with every brand of DCC system and with every computer control app IO input that can sense a high/low detection. […]
76. Legacy Models Intelligent Detector (Single Pack)
Legacy Models Intelligent Detector Single Pack (LM-iD.1) The Legacy LM-iD is an intelligent Inductive detector that is easy to install, trouble free and exceptionally reliable. LM-iD works everywhere: On layouts built in every common modelling scale, with every brand of DCC system and with every computer control app IO input that can sense a high/low […]
77. Intelligent DCC Circuit Breaker
Perfect for all brands of DCC systems, including low-powered starter systems such as Hornby, NCE and Prodigy systems. The DCCconcepts Intelligent DCC Circuit Breaker (iP-CB) works “out of the box” to protect your layout and DCC system against damage caused by overloads and short circuits. Simple-set jumpers for current limit selection between 1.25A and 5A. […]
78. Zen SUPER high power stay alive x 3 (Value pack)
Zen SUPER high 2-wire power stay alive has exceptional power storage. In fact, once charged, they have enough power to run an average OO or HO Locomotive more than two metres with the track power removed! They are available singly (DCD-SA2-SS.1) (was DCD-ZNSSA-1) or in cost-saving packs of three (DCD-SA2-SS.3) (was DCD-ZNSSA-3). Click HERE for a […]
79. Zen SUPER high power stay alive x1
Zen SUPER high 2-wire power stay alive has exceptional power storage. In fact, once charged, they have enough power to run an average OO or HO Locomotive more than two metres with the track power removed! They are available singly (DCD-SA2-SS.1) (was DCD-ZNSSA-1) or in cost-saving packs of three (DCD-SA2-SS.3) (was DCD-ZNSSA-3). Click HERE for a […]