You searched for back to back gauge

Search DCCconcepts

Please take advantage of our search feature to easily find products, videos, manuals, advice and more!

1. Roller Gauge (w/handle) OO/HO (Fine) 16.5mm FB (2 Pack)

Roller Gauge (w/handle) OO/HO (Fine) 16.5mm FB (2 Pack) Roller Gauge Trackmaking tools for Finer looking OO/HO track using OO-FB standards. 1mm flangeways will look great but are designed for finer wheel back to back spacing so RTR will need adjusting! Made for use with with code 70/75/83 flat-bottom rail (1.1mm flangeways)! Two roller gauges […]

2. 3 Point Track Gauge OO/HO (Fine) 16.5mm

3 Point Track Gauge OO/HO (Fine) 16.5mm Beautiful quality milled brass 3 point track gauges, with handle. Made to 16.5mm gauge fine standards and used for the creation of pointwork with finer flangeways . Back to back will need adjustment for many RTR locos, and kit built locos using Romford or Markits axles should ideally […]

3. Back to Back P4 Scale 17.75mm

Back to Back P4 Scale 17.75mm Brass back-to-back gauge for modellers using P4 gauge and related P4 gauge track and wheel standards. Click to view other sizes in our back to back gauge range.

4. Back to Back OO/HO (Special Fine) 14.85mm

Back to Back OO/HO (Special Fine) 14.85mm Brass back-to-back gauge for modellers using fine scale wheel standards (RP25-88, Gibson, Ultrascale, DCCconcepts Coach wheels). Click to view other sizes in our back to back gauge range.

5. Back to Back OO/HO (Fine) 14.75mm

Back to Back OO/HO (Fine) 14.75mm Brass back-to-back gauge for modellers using NMRA standard PR25 and similar wheelsets running on Peco Code 75 or finer track (inc Shinohara) or running on hand laid track using 16.5 gauge NMRA standards. Clickt o view other sizes in our back to back gauge range.

6. Back to Back OO/HO (Standard) 14.5mm

Back to Back OO/HO (Standard) 14.5mm Brass back-to-back gauge for Standard OO and HO ready to run, plus models built using BRSMB wheel standards OR running on pointwork built using OO-SF standards for common crossing and related gauging. Click to view other sizes in our back to back gauge range.

7. Back to Back – Sn3 or HOn-35 (Standard) 12.4mm

Brass Back-to-back gauge for SN30 or HOn3.5 or Narrow gauge (14mm track) (3’0″ gauge S Scale or 3’6″ gauge, HO Scale. set to NMRA standards)

8. Back to Back – TT / HOm 10.24mm

Brass Back-to-back gauge for 12mm gauge track – HO-M, TT or US Narrow gauge (Meter or US 3’0″ gauge, HO Scale. set to NMRA standards) Please note – not suitable for HOn-3 10.5mm gauge.

9. Back to Back N Scale (Standard) 7.65mm

Back to Back N Scale (Standard) 7.65mm Brass back-to-back gauge for modellers using N scale. – Set to the mid point of standards for universal success using US, EU or UK models. Click to view other sizes in our back to back gauge range.

10. Track Cutters (Super Sharp)

Track Cutters (Super Sharp) Exclusively made for DCCconcepts. These super sharp cutters have a flat back for a perfect flush cut and have been hardened to the limits to stay sharp. They should be used with one jaw on the bottom of the rail so they cut vertically – doing this gives the cleanest and […]

11. Ultimate Track Cutters

Exclusively made for DCCconcepts. The HTC can be used to cut track that is already laid, and, because the cutting area is much larger when track is cut this way, it has a heavier jaw structure and slightly different cutting angle on the blade. You should use this version for heavier rail too (anything larger […]

12. High Quality Power Bus Strippers

DCCconcepts heavy duty BUS wire strippers are the best time saver ever! Save HOURS when installing the main power bus and if you plan well you can also do it with NO need for cuts and breaks in it at all with this really high quality tool. Machined high quality alloy steel jaws strip all […]

13. Cobalt iP Digital (72pc Club Pack)

Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motor 72 Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads. The Cobalt-iP “Club Pack” is designed to support those building large layouts such as cooperative layout builds and clubs. The […]